Limitations of Microcarriers in High Density Cell Culture
For a significant length of time, microcarriers have been used for high density cell culture. These microcarriers are added into stirred tank bioreactors and then adherent cells bound into them to grow and proliferate. While microcarriers can be a vital part in high density cell culture it also poses significant limitations which makes the process of cell culture very laborious and expensive.
These limitations are:
- A stirred tank reactor utilizes agititation in order to make a homogenous cell culture system. However, agitation leads to the generation of turbulence thus exposing the microcarrier-bound-cells to be subjected to mechanical shear stress which causes apoptosis or cell death.
- Eddy, which is generated from fluid turbulence, also directly interacts with the adherent cells which significantly damages the cells and results to greater number of cell debris and thus low cell yield and added downstream processing costs.
- Increasing the number of microcarriers used will lead to higher density cell culture however this leads to higher degree of collisions (i.e. bead-to-bead or microcarrier-bound-cells to mechanical impeller). When cells collide with each other it incurs great damage in them and results to cell death and decreased cell yield.
- Scale-up is a very critical issue in microcarrier based cell culture. Higher energy dissipation causes the cells to experience stress which in turn leads to cell death.
- Aeration is also a big issue in scale-up of microcarrier based cell culture. Uneven distribution of oxygen leads to cell damage.
- Spargers, which produces bubbles, are used to induce oxygen in the system. However, the bubbles formed by the sparger can entrap the microcarriers with cells bound into them. This phenomenon leads to great decrease of cell yield due to cell death.
- Foaming and bubbling can be reduced by adding anti-foaming agents in the system but these chemicals can also be damaging to the cells and cause cell death.
The VacciXcell Solution
VacciXcell’s Tide Motion Bioreactors eliminates all these limitations by utilizing tide motion principle which is the gentle vertical oscilation of culture medium into and out of the matrix vessel which intermittently exposes the cells to aeration and nutrition. Integration of tide motion principle makes our bioreactors produce high quality and great quantity of cells due to low shear stress, equal nutrition distribution and no oxygen limitation which leads to minimal downstream processing and reduced production cost. Our bioreactors can also be integrated to an isolator which totally eliminates the possibility of contamination. Lastly, VacciXcell offers true linear scalability platform where scaling up is as easy as adding equipment with higher volume capacity but the bioprocessing principle is the same.